Filter
Top Products
Rub the test area with a cotton swab or
soft cloth dampened with water to
remove all blood, dirt, or lint from the
test area. If necessary, a mild liquid dish
washing detergent mixed with water
may also be used. Do not apply full-
strength detergent
to the test area. Be
careful not to
scratch the test
area. Dry the test
area with a soft,
dry tissue or cloth.
Remove any lint.
Step 4: Replace the Test Strip Holder.
Hook the bottom of the test strip holder onto
the square notch on the meter.
Press down on the raised dots of the test strip
holder until it snaps firmly into place.
65
CM
C
M
CM