Filter
Top Products
The display messages that appear on your One Touch
™
Profile
™
Meter will guide you
through testing procedures, alert you to any problems as they occur, and give you informa-
tion about test results stored in the meter’s memory. This section provides you with a com-
plete listing of the display messages, what they mean, and what to do if there is a problem.
TEST PROCEDURE MESSAGES
CODE 10 The meter is first turned on. The code number (1-16) on the
(for example) meter must match the code number on the test strip vial.
7:26 AM 6 01 00
INSERT The meter is ready to perform a blood, check strip, or control
CODE 10
(for example) solution test.
STRIP
WAIT The meter is performing internal checks.
PLEASE
APPLY The meter is ready to receive a blood or control solution sample.
SAMPLE If performing a check strip test, this is your signal to remove the check
strip (purple side up) from the meter.
52
SOLVING PROBLEMS
MESSAGE APPEARS WHEN