Filter
Top Products
Inspection procedure
09/93 3691-DMF
Service Manual M695
Doc Code 636 718
1.3
Activate the foot- or handswitch functions.
•
The appropriate LED on the function display shines.
(If a fault arises, exchange the foot- or handswitch and repeat the inspection procedure.
If there is still a fault, then its source is to be found in the MEL64/65 control unit.)
(Fault location in hand-/footswitch functions, page 4-4)
ML on/off
Microscope lamp ML
A on/off
Additional illumination
Focus up
Focus down
Zoom up
Zoom down
A
1.4
Connect cables of microscope and swingarm,
•
The plugs must go in and out without difficulty.