Filter
Top Products
Service manual M695
Doc code 636 718
M695 Fault finding
09/93 3077-HWE
M695 Fault finding
Preparation
1. Connecting the testbox
l
Disconnect plug P36 from swingarm
l
Hook in the testbox to the swingarm and plug in P36 at the testbox.
l
Connect the testbox cable (green sleeve) with J36 at the swingann. With
that the control unit is connected with the microscope through the testbox.
l
Set switch “MICROSCOPE SELECT” on the testbox to position A.
4-1