Filter
Top Products
5
Product Dimensions
Cabinet Dimensions
Interior-mounted blower motor model Exterior-mounted blower motor model
NOTES:
■ See cooktop manufacturer’s instructions for cooktop cutout
depth and width.
■ Use dimensions for vent system cutout location that applies
to your installation.
■ Interior mounted blower systems connect with 6" (15.2 cm)
round vent. The cutout locations for this vent system will
depend on your specific installation.
NOTES:
■ See cooktop manufacturer’s instructions for cooktop cutout
depth and width.
■ Exterior-mounted blower systems connect with 10" (25.4 cm)
round vent. The cutout locations for this vent system will
depend upon your specific installation.
Top trim widths:
30¹⁄₄" (76.8 cm) for 30" (76.2 cm) vent
36¹⁄₄" (92.1 cm) for 36" (91.4 cm) vent
13¹⁄₂" (34.3 cm)
retractable
vent height
27" (68.6 cm) for 30" (76.2 cm) vent
33" (83.8 cm) for 36" (91.4 cm) vent
13" (33.0 cm)
9¹⁄₄"
(23.5 cm)
³⁄₄"
(1.9 cm)
2¹⁄₈" (5.4 cm)
28³⁄₄"
(73.0 cm)
³⁄₈" (0.95 cm)
1¹⁄₂" (3.8 cm)
13" (33.0 cm)
Interior-mounted blower motor model
Exterior-mounted blower motor model -
used with Part Number KPEC992M
¹⁄₄" (0.6 cm)
13" (33.0 cm)
6¹⁄₂"
(16.5 cm)
10" (25.4 cm)
diameter
vent collar
13" (33.0 cm)
6¹⁄₂"
(16.5 cm)
³⁄₄" (1.9 cm)
Terminal box cover
6" (15.2 cm)
diameter
vent collar
A= ¹⁄₂" (12.7 mm)
minimum
21⁵⁄₁₆"
(54.1 cm)
All cutouts are
for 6" (15.2 cm)
diameter vent
system.
Centerline of cooktop cutout
23³⁄₄"
(60.3 cm)
21⁵⁄₁₆"
(54.1 cm)
Locate power
supply junction
box at lower
left hand
rear corner
of the cabinet.
7⁵⁄₈" (19.4 cm)
¹⁄₂" (12.7 mm)
minimum
Locate power
supply junction
box at lower
left hand
rear corner
of the cabinet.