Support User Manuals

Invacare X-Terminator Titanium Wheelchair User Manual

Open as PDF

of 76

SECTION 8—SUSPENSION

Part No 1114851 71 Everyday and Sport Series Wheelchairs

FIGURE 8.1 Replacing Rear Elastomers

Replacing Front Elastomers

CAUTION

DO NOT use excessive force when removing/installing the threaded sleeve

from/onto the fork. Damage to the threaded sleeve may occur.

NOTE:Forthisprocedure,refertoFIGURE 8.2.

1. Usingtwoallenwrenches,turninoppositedirections andremoveonemounting

screwfromfork.

NOTE:Onemountingscrewwillnotturn.

2. Removethethreadedsleeveandmountingscrewassemblyfromthefork.DONOT

useexcessiveforce.

3. Removetheexistingelastomerfromthefork.

4. InstallNEWelastomerdeterminedinSTEP1intofork.

NOTE:Makesuretheelastomersitsinthetworecessedareasonthefork.

5. Alignthemountingholesintheupperandlowerportionofthefork.

6. Reinstallthreadedsleeveandmountingscrewassembly.DONOTuseexcessiveforce.

Outside of

Wheelchair Frame

Inside of Wheelchair Frame

Suspension Base

Mounting

Holes

Axle Bracket

Inner Allen

Screw

Recess

Elstaomer

Pivot Pin

Recess

Outer Allen

Screw

previous next