Filter
Top Products
SECTION 15—ANTI-TIPPERS
Part No.1106644 67 Nutron® Series
SECTION 15—ANTI-TIPPERS
ƽ WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
Installing/Removing the Anti-Tippers
ƽ WARNING
Anti-tippers MUST be fully engaged and spring buttons fully protruding out of
adjustment holes BEFORE using the wheelchair.
Ensure both anti-tippers have the same ground clearance.
A 1½ to 2-inch clearance between the bottom of the anti-tipper wheels and the
ground/floor MUST be maintained at all times.
Anti-tippers MUST be used at all times. When outdoors on wet, soft ground or
gravel surfaces, anti tippers may not provide the same level of protection against
tipover. Extra caution must be observed when traversing such surfaces.
NOTE:Forthisprocedure,refertoFIGURE 15.1.
Installing
1. Pressthetwo(2) releasebuttonsinandinserttheanti‐tipperswithanti‐tipperwheels
pointingtowardtheground/floorintothesupporttubesuntilthereleasebuttonslock
inplace.
2. Measurethedistancebetweenthebottomoftheanti‐tipperwheelsandthe
ground/floor.
3. Ifthedistancebetweenthebottomof
theanti‐tipperwheelsandtheground/flooris
not1½‐2‐inches,donotusetheanti‐tippers.Replaceanti‐tippersandrepeatSTEPS1
and2.
Removing
1. Pressreleasebuttonsinandremovetheanti‐tippersfromthesupporttubes.