Filter
Top Products
Part No. 1119240 23 INVACARE MX
8-INCH FRONT CASTERS
SEAT-TO-FLOOR FRONT CASTER REAR REAR WHEEL
HEIGHT MOUNTING WHEEL MOUNTING
(in inches) POSITION SIZE POSITION
17-1/2 TOP 24-inch TOP
19-1/2 BOTTOM 24-inch BOTTOM
SEAT-TO-FLOOR HEIGHT SECTION 9
SEAT-TO-FLOOR HEIGHT
Section 9 - Seat-to-Floor Height includes the following:
Changing Seat-To-Floor Height
CHANGING SEAT-TO-FLOOR HEIGHT (FIGURE 1)
WARNING
Seat-to-floor heights have specific positions depending on rear wheel size,
rear wheel position, and front caster position. These adjustments MUST
be performed by a qualified technician.
1. Refer to the following chart in FIGURE 1 to determine mounting positions for front
casters/forks and rear wheels for the desired obtainable seat-to-floor height.
2. Remove the rear wheels from the wheelchair. Refer to REMOVING/INSTALLING
THE REAR WHEELS in SECTION 6 of this manual.
3. Remove the front casters from the wheelchair. Refer to REPLACING FRONT
CASTERS in SECTION 7 of this manual.
4. Reinstall the rear wheels onto the wheelchair in the mounting position indicated in
the chart. Refer to REMOVING/INSTALLING THE REAR WHEELS in SECTION 6
of this manual.
5. Re-install the front casters onto the wheelchair in the mounting position indicated in
the chart. Refer to REPLACING FRONT CASTERS in SECTION 7 of this manual.
FORK
MOUNTING POSITIONS
REAR WHEEL MOUNTING
POSITIONS
FIGURE 1 - CHANGING SEAT-TO-FLOOR HEIGHT
TOP
BOTTOM
TOP
MIDDLE
BOTTOM
SEAT TO FLOOR HEIGHT