Filter
Top Products
INVACARE MX 18 Part No. 1119240
Section 5 - Seat and Back includes the following:
Replacing Back Upholstery
Replacing Seat Upholstery
REPLACING BACK UPHOLSTERY (FIGURE 1)
1. Remove the eight (8) phillips screws and eight (8) washers that secure the existing
back upholstery to the back canes.
2. Remove existing back upholstery from the back canes.
3. Securely tighten the new back upholstery to the back canes with the phillips screws
and washers.
REPLACING SEAT UPHOLSTERY (FIGURE 2)
1. Remove the eight (8) phillips screws and eight (8) washers that secure the existing
seat upholstery to the crossbraces.
2. Remove the EXISTING seat upholstery from the crossbraces.
3. If used, ensure position of seat positioning strap. Refer to INSTALLING THE SEAT
POSITIONING STRAP in SECTION 10 of this manual.
4. Install NEW seat upholstery by reversing STEPS 1-2.
SEAT AND BACKSECTION 5
SEAT AND BACK
SEAT AND BACK
FIGURE 1 - REPLACING BACK UPHOLSTERY
Phillips
Screws
Washers
Washers
Back Upholstery
Phillips Screws
FIGURE 2 - REPLACING SEAT UPHOLSTERY
Seat Upholstery
Back Canes