Filter
Top Products
INVACARE MX 4 Part No. 1119240
SPECIAL NOTES
WARNING/CAUTION notices as used in this manual apply to hazards or
unsafe practices which could result in personal injury or property damage.
NOTICE
THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT
TO CHANGE WITHOUT NOTICE.
WHEELCHAIR USER
As a manufacturer of wheelchairs, Invacare endeavors to supply a wide
variety of wheelchairs to meet many needs of the end user. However, final
selection of the type of wheelchair to be used by an individual rests solely
with the user and his/her healthcare professional capable of making such a
selection.
This wheelchair has not been approved as a seat surface to be used within a
vehicle of any kind. Always transfer wheelchair user to an approved vehicle
seat with the appropriate restraints for this application.
Rear anti-tipper kit number 1058836 can be purchased for this wheelchair.
Invacare strongly recommends the use of rear anti-tippers as an additional
safeguard for the wheelchair user.
AS REGARDS TO RESTRAINTS - SEAT POSITIONING STRAPS - IT IS
THE OBLIGATION OF THE DME DEALER, THERAPISTS AND OTHER
HEALTHCARE PROFESSIONALS TO DETERMINE IF A SEATING RE-
STRAINT IS REQUIRED TO ENSURE THE SAFE OPERATION OF THIS
EQUIPMENT BY THE USER. SERIOUS INJURY CAN OCCUR IN THE
EVENT OF A FALL FROM A WHEELCHAIR. SEAT POSITIONING
STRAP KIT NUMBER 1004310 CAN BE PURCHASED FOR THIS WHEEL-
CHAIR. INVACARE STRONGLY RECOMMENDS THE USE OF SEAT
POSITIONING STRAPS AS AN ADDITIONAL SAFEGUARD FOR THE
WHEELCHAIR USER.
SPECIAL NOTES
SPECIAL NOTES
SPECIAL NOTES