Filter
Top Products
Part No. 1119240 17 INVACARE MX
SECTION 4ARMS
ARMS
Section 4 - Arms includes the following:
Using Flip Back Armrest
USING FLIP-BACK ARMREST (FIGURE 1)
WARNING
DO NOT operate flip-back armrest when wheelchair is folded - otherwise
injury or damage may result.
Ensure armrest is securely locked into arm socket and armrest release button
locks into place BEFORE using.
1. Push down on front of armrest to
ensure it is fully seated in front socket.
NOTE: This step is needed to prevent the
release button from hanging up on the
socket.
2. Press in armrest release button
located on armrest front tube.
3. Rotate front of armrest UP and
OUT of arm socket.
NOTE: Armrest can rotate back approxi-
mately 90°.
4. To prepare armrest for use, rotate
armrest downward, making sure
front tube of armrest inserts into
arm socket.
5. Push armrest down until release button snaps into arm socket.
6. Ensure armrest is securely locked into arm socket and armrest release button locks into
place BEFORE using.
ARMS
Arm Socket
Armrest Release
Button
Armrest Front
Tube
Armrest Rear
Tube
FIGURE 1 - USING FLIP-BACK ARMREST