Filter
Top Products
Part No. 1119240 21 INVACARE MX
SECTION 7FRONT CASTERS
FRONT CASTERS
FIGURE 2 - REPLACING FRONT CASTERS
Washer (if applicable)
Hex Screw
Washer (if applicable)
Front Caster
Locknut
Fork
REPLACING FRONT CASTERS (FIGURE 2)
WARNING
Make sure both front casters are the same size and are installed into the
same respective mounting hole BEFORE using the wheelchair, otherwise
injury may occur.
1. Remove the hex screw, washers and locknut that secure the front caster to the fork.
NOTE: Washers are only used with casters with precision bearings.
2. To reinstall the new front caster onto the fork, reverse STEP 1.
FRONT CASTERS