Filter
Top Products
8
PREPARING THE INFINITY BACK FOR INSTALLATION
Top Flap
Bottom
Flap
Fastening Strips
(Attach to Back Panel)
Infinity
Back
Fastening
Strips
Elastic
Strip
REMOVING.
1. Remove the back cushion from the back panel(s).
Refer to INSTALLING/REMOVING BACK CUSH-
ION in this procedure of the manual.
2. Grasp the spinal insert(s) and pull to release the hook
and loop fasteners.
3. Install the cushion onto the back panel(s). Refer to
INSTALLING/REMOVING BACK CUSHION in this
procedure of the manual.
Installing/Removing Lateral Support
Cushions
INSTALLING.
1. Hold the fastening end of the cushion away from the
fastening strip on the support.
2. Insert the support into the pocket on the opposite end
of the cushion as shown in FIGURE 2.
3. Release the fastening end of the cushion.
4. Press the fastening end firmly against the support to
secure.
REMOVING.
1. Grasp the fastening end of the cushion.
2. Pull upwards to release the hook and loop fasteners
as shown in FIGURE 2.
3. Slide the cushion off the support.
Installing/Removing Back Cushion
INSTALLING.
1. Lift the top flap up and pull the bottom flap down on
the back cushion cover.
2. Position the cushion against the back panel(s) with
the flaps on the outside of the Infinity Back.
NOTE: Ensure the lateral supports are positioned between
the back cushion foam and the elastic strips on either
side of the back cushion cover as shown in FIGURE 2.
3. If desired, install the adjustable positioning pad
(UniBack only) onto the back cushion foam. Refer to
INSTALLING/REMOVING CUSHION FOAM in
PROCEDURE 5 of this manual.
4. Close the top and bottom flaps of the back cushion cover
and press the fastening strips together to secure the back
cushion to the Infinity Back as shown in FIGURE 2.
REMOVING.
1. Grasp the top flap and pull up to release the fastening
strips.
2. Grasp the bottom flap and pull down to release the
fastening strips.
3. Grasp the cushion and pull away from the Infinity
Back to remove.
BACK CUSHION
FIGURE 2 - INSTALLING/REMOVING CUSHIONS
PROCEDURE 2
P
R
E
P
A
R
I
N
G
T
H
E
B
A
C
K
Lateral Pad
Support
NOTE: Lat-
eral support
not installed
for clarity.
Hook and Loop
Fastening Strips
Pocket
FASTENING
END
POCKET
END
LATERAL SUPPORT
SPINAL INSERT
Spinal
Inserts
Fastening
Strips
Rounded Groove
in Back Panel
Rounded Edge
Back Cushion
Top
Flap
Bottom
Flap
Lateral
Support