Filter
Top Products
SECTION 2—ASSEMBLY
Part No 1141431 15 Reliant 440
4. Slide the kneepad in or out until it is locked into position.
FIGURE 2.2 Attaching Kneepad
Attaching Battery
ƽ WARNING
Ensure there is an audible click when installing the battery either on the battery
charger or control box. Otherwise, injury or damage may occur.
NOTE: For this procedure, refer to FIGURE 2.3.
1. Install the battery into the control box and ensure there is an audible click (Detail “A”).
2. Ensure that the control box emergency push button is set to the Off (out) position
(Detail “B”).
3. If the control box emergency push button is set to the On position, turn the button ¼
turn clockwise, and the button will pop out.
FIGURE 2.3 Attaching Battery
Actuator
Bolt
Boom
DETAIL “B”
DETAIL “A”
Post
Post
Kneepad
Kneepad
Receiver
Kneepad
Release
Lever
Tube
Retainer
Tube
Retainer
Emergency Push
Button
DETAIL “A”
DETAIL “B”
Battery
Control Box