Filter
Top Products
Brookfield Engineering Labs., Inc. Page 27 M/02-212
Key-function dependent to executed operation
key operation Function of key example
Menue goto previous menue-entry „Utilities“ → „Remote“
(above active one)
Value-input increment „8
“ → „9“
„A
“ → „B“
Selection from List list entry above active Select Meas.system
entry (previous) „CC45“ → „CC48“
Menue goto next menue-entry „Remote“ → „Utilities“
(below active one)
Value-input decrement „5
“ → „4“
„F
“ → „G“
Selection from List list entry below active Select Meas.system
entry (next) „CC48“ → „CC45“
Menue goto previous menue-entry „Utilities“-> „Remote“
(above active one)
Value-input one digit to the right „1
00.00“->„100.00“
„Test“->„Test“
Selection from List list entry above active Select Meas.system
entry (previous) „CC45“ -> „CC48“
Menue goto next menue-entry „Remote“->Utilities“
(below active one)
Input one digit to the left „1
00.00“->„100.00“
„Test“->„Test“
Selection from List list entry below active Select Meas.system
entry (next) „CC45“ -> „CC48“
ST
Menue return to parent-menue „UTILITY“->„MAIN“
Value-input Input break
(only if possible)
Selection from List Selection break Select Meas.system
(only if possible) ->back to menue
Messung START and BREAK break while measuring
of measurement Messung
Remote active Break of measurement
Back to MAIN-menue
OK
Menue execute Menue item
(open sub-menue)
Value-input End of input / enter value
Selection from List select active item
A novice might perceive this keyboard layout excessively complicated, however, even after your first
experiments, you will surely come to the conclusion, that you do not need the layout Table for reference
and multi-function keys ensure major simplification of the operations.