Filter
Top Products
World Scale
Supervisor Mode 4-4
Entering Supervisor
Mode (WC30)
With the WC30 Price Computing Scale, you have the capability to
limit the number of personnel who have access to Supervisor
mode. There is an Access Code shown in the steps below. Keep
this code secure and do not allow it to become public knowledge.
To access Supervisor mode for the WC30 Price Computing Scale,
perform the following steps:
1. Short PRESS the Display Test key.
2. The Status Display Screen will appear.
3. TYPE the Access Code [6231] on the Keypad
using a Short PRESS.
4. The initial Supervisor Screen will now appear.
QUICK STEPS -
Entering Supervisor Mode
(WC30)
1. Short PRESS Display Test
key
2. Status Display Screen appears
3. TYPE [6231]
4. Initial Supervisor Screen
appears
5. Use Function Keys/Codes
from here on
5. From this point on you must use Function Keys
and Function Codes to navigate through
Supervisor mode. See the topic, Navigating
Supervisor Mode later in this chapter.
Exiting Supervisor Mode
(WC30)
To exit Supervisor mode in the WC30 Price Computing Scale,
perform the following steps:
1. Short PRESS the Display Test key.
2. Short PRESS the [C] key.
3. You will be returned to the Status Display
Screen.
QUICK STEPS -
Exiting Supervisor Mode (WC30)
1. Short PRESS Display Test
key
2. Short PRESS [C]
3. Status Display Screen appears
4. Operator Display Screen
appears
4. Then the Operator Display Screen appears.