Filter
Top Products
World Scale
4-3 Supervisor Mode
Entering and Exiting
Supervisor Mode
Be sure to follow the steps for your type of World Scale:
♦ Entering Supervisor Mode (WP30)
♦ Exiting Supervisor Mode (WP30)
♦ Entering Supervisor Mode (WC30)
♦ Exiting Supervisor Mode (WC30)
Entering Supervisor
Mode (WP30)
To access Supervisor mode for the WP30 Portion Control Scale,
perform the following steps:
1. Short PRESS the Display Test key.
2. The Status Display Screen will appear.
3. Short PRESS the [C] key as soon as the Status
Display Screen appears.
4. The initial Supervisor Screen will now appear.
QUICK STEPS -
Entering Supervisor Mode
(WP30)
1. Short PRESS Display Test
key
2. Status Display Screen appears
3. Short PRESS [C]
4. Initial Supervisor Screen
appears
5. Use Function Keys/Codes
from here on
5. From this point on you must use Function Keys
and Function Codes to navigate through
Supervisor mode. See the topic, Navigating
Supervisor Mode later in this chapter.
Exiting Supervisor Mode
(WP30)
To exit Supervisor mode in the WP30 Portion Control Scale,
perform the following steps:
1. Short PRESS the Display Test key.
2. Short PRESS the Zero [→0←] key.
3. You will be returned to the Status Display
Screen.
QUICK STEPS -
Exiting Supervisor Mode (WP30)
1. Short PRESS Display Test
key
2. Short PRESS [→0←]
3. Status Display Screen appears
4. Operator Display Screen
appears
4. Then the Operator Display Screen will appear.