Filter
Top Products
World Scale
3-3 Using World Scale
Using Tare (WP30)
You have the following options available on your WP30 Portion
Control Scale:
♦ Platter Tare (WP30)
♦ Cumulative Tare (WP30)
♦ Cancelling a Tare (WP30)
Note
• The Tare is retained until you cancel it.
• If you have a Tare in the scale’s memory and the scale goes
into Sleep mode, the Tare will be lost.
• When you have a Tare in the World Scale’s memory, you will
see a left arrow (
) on the left side of the Operator Display
Screen, next to the word “net”.
Platter Tare (WP30)
Platter Tare is used when you are planning to weigh one product,
one time.
To use Platter Tare:
1. Place the empty container onto the scale.
2. Short PRESS the [→T←] key.
3. Place the product into the empty container.
4. Net Weight will be displayed.
5. Remove the product and the container from the
scale.
QUICK STEPS -
Platter Tare (WP30)
1. Place empty container on
scale
2. Short PRESS [→T←]
3. Place product into container
4. Net Weight displays
5. Remove product and
container
6. Cancel Tare, if needed
6. Cancel the Tare, if necessary.