Filter
Top Products
25
Often it is necessary to "customize" testing to meet specific criteria in
the laboratory. For this reason, Hanna offers a wide line of NTC
Thermistor sensors that can be custom mounted in almost any situation.
Select the sensor that matches your application, attach it to the RCA
adaptor and plug it into the meter. You have now a temperature
sensor that is custom fit to your requirements.
The following is a list of the NTC Thermistor sensors and plug available:
HI 76P2-1 RCA plug with 1 meter (3.3') cord.
HI 76S2-1 NTC Thermistor sensor. Teflon
®
coated with hole for
mounting.
HI 76S2-2 NTC Thermistor sensor. Self-adhesive, foam disk for
mounting.
HI 76S2-3 NTC Thermistor sensor. Eye-connector for mounting.
HI 76S2-4 NTC Thermistor sensor. Molded tip with epoxy seal for
aggressive environments.
DIA 3.8mm
0.15"
7.1mm
0.28"
4.8mm
0.19"
ALUMINUM
HOUSING
19mm
0.75"
300mm
12"
25.4mm
1.0"
6.4mm
0.25"
TEFLON TUBING
6.4mm
0.25"
38mm
15"
RELEASE
LINER
MYLAR
FOIL
25.4mm
1.00"
38mm
1.5"
FOAM
DISK
3mm
0.12"
6.4mm
0.25"
406mm
16"
19mm
0.74"
9.6mm
0.38"
#6 STUD SIZE
TIN PLATED Cu
EPOXY
5.5mm
0.22"
1mm
0.04"
Teflon
®
is registered Trademark of "du Pont de Nemours & Co."
UN-HOUSED NTC SENSORS
6.4mm
0.25"
406mm
16"
9.6mm
0.38"
EPOXY FILLET
MOLDED TIP
2mm
0.08"