Filter
Top Products
20
Windows
®
is registered Trademark of "Microsoft Co."
Excel
©
Copyright "Microsoft Co."
Lotus 1-2-3
©
Copyright "Lotus Co."
HI 98811 contains infrared transmitting circuitry.
Ensure there isn't any logging process active.
Press TEMP/TIME to set the meter to time or date mode and simply
place your data-logger on a HI 9200 Infrared Transmitter (ensuring
that the two infrared LEDs are placed on top of each other) and the
memory content can then be downloaded to your PC through the
HI 9200's RS232 port. Just ensure that baud rate on instrument
(setup code 50) and on PC downloading
program are set to the same value.
During data transfer the instrument displays
the message "r 232".
To stop communication, press TEMP/TIME to display the temperature
reading or take the meter out of the transmitter when it's not
displaying "r232".
Using the HI 9200 Infrared Transmitter, all recorded data can be
uploaded to your PC for easy reproduction, storage or elaboration
without the need of cables between the meter and the transmitter.
Data transmission from the instrument to the PC is supported by the
HI 92000 Windows
®
compatible application software offered by
Hanna Instruments.
HI 92000 allows you to memorize in a database the downloaded data
from different instruments, for different periods of time and for different
reading locations. The records will contain the date and time, specific
reading, the place of reading and the logging way (Log on demand or
Auto logging). HI 92000 offers support for database data management
by applying different selection criteria: period of time, reading location,
logging way. With the results of selection it is possible to make graphics,
statistic analysis or to export data into Excel format file.
User friendly, HI 92000 offers a variety of features and has an online
help to support you throughout any situation.
To install HI 92000 you need a 3.5" drive and a few minutes to
follow the instructions conveniently printed on the disk label.
DATA TRANSFER TO PC