Filter
Top Products
12
• If the sample number is correct, the samples starting from the
selected one to the last sample of the lot will be printed. To stop
printing before the last sample is reached, press and hold down
the ALT and PAPER keys until the printer stops.
• The Sample ID will be printed for each sample of Lot 00, and
once per lot for Lot 01 to Lot 16.
• During printout, the LCD will display the sample number that is
being printed at that moment. If printout is stopped the LCD will
show the last printed sample number. It is then possible to select
another sample.
• Press ALT and FNC to return to setup mode.
Viewing logged data
• Press TEMP/TIME to view data of the selected sample. Data will
be displayed in the following order:
Sample ID - for Lot 00 only
temperature value
date
time
• If TEMP/TIME is pressed when the time is displayed, the LCD will
pass to the next sample number.
• It is then possible to scroll the data of the next sample by
pressing TEMP/TIME or select a different sample using the Arrow
keys.
• to return to setup mode, press ALT and FNC when the meter
displays the sample number.
Cod. 02 - Lot summary printout
• Select the code 02.
• The message "Lot table Printing" will scroll twice across LCD.
• The meter will then print a complete set of information based on
the data stored in memory:
a - lot number
b - logging interval
c - Sample ID
d - starting date
e - number of samples
f - starting time
Note: For lot 00, only the number
of samples will be printed.
S.0031 17.22
19/12/2004
#02 15 m
S.0007 15.40
19/12/2004
#01 30 m
#00 S.013
ID 2*3 9*4 3 6
ID - - - - - -