Golden Technologies GL110 Mobility Scooter User Manual


 
LiteRider™ Owner’s Manual Rev.A_122810
VIII. ASSEMBLY
Install the Under-the-Seat and Tiller Baskets
6. Place the under-the-seat basket onto the frame. Place the tiller basket onto the tiller. See
#1 and #2 on figure 15 on page 24.
Install the Seat
7. Hold the seat on an angle so you can see the seat swivel post underneath
8. Place the seat swivel post into the seat post as shown in figure 23.
9. Push the seat down. Ensure that the seat is properly engaged by turning the seat
slightly left and right.
Figure 23. Installing the Seat
Pinch Point! Keep hands and clothing clear of the seat swivel post and seat post.
Accident hazard due to non-engaged seat! Ensure that the seat is properly
engaged by turning the seat slightly left and right.
Unlock the Tiller
10. Turn the tiller lock knob counterclockwise 90 degrees to the unlocked position.
See #2 on figure 22 on page 27.
IF YOU DON’T UNLOCK YOUR TILLER LOCK KNOB, YOUR TILLER
WILL NOT TURN! THIS COULD CAUSE INJURY.
Accident hazard due to incorrect seat position! Always turn the seat to face
forwards and engage it before driving. If the seat is in any other position, the possibility of
tipping is increased. Before turning the seat, always ensure that the scooter is on an even
and solid surface.
28