Filter
Top Products
LiteRider™ Owner’s Manual Rev.A_122810
VII. DISASSEMBLY
Fold Down and Lock the Tiller
6. Push in and turn the tiller lock clockwise 90 degrees. See #1 on figure 16. This will lock the
front wheel to keep it from turning side to side to help control while carrying.
Figure 16. Lowered Tiller
7. Loosen tiller adjustment knob and fold the tiller down flat. See #2 on figure 16. Then
tighten the adjustment knob to secure the tiller in its new position. Once the tiller is
lowered and locked, and the scooter is disassembled you may use it as a handle for easy
transportation. See #3 on figure 16.
Separate the Drivetrain from the Frame
Be careful not to pinch your fingers between the frames. This area is a
pinch-point and requires your full attention.
8. Pull up on the drivetrain release lever. See figure 17. Pull the frame up and off of the
drivetrain. See figure 18.
Figure 17. Releasing the Drivetrain Figure 18. Lifting the Frame
25
1
2
3
Tillerlock inlockedposition.