Golden Technologies GL110 Mobility Scooter User Manual


 
LiteRider™ Owner’s Manual Rev.A_122810
VII. DISASSEMBLY
DISASSEMBLY
Your LiteRider scooter is designed to be disassembled easily in order to be transported.
When disassembling your scooter, please be sure to follow these simple instructions.
Remove the Seat
1. Place your scooter on a level surface.
Remove the key from the key switch before you begin to disassemble your
LiteRider.
2. (Optional) Loosen the armrest adjustment knobs and remove the arms from the seat.
This will reduce the weight of the seat making it easier to lift.
3. Grip the seat on opposite sides and, with a firm grip, pull the seat straight up towards
you. See figure 13.

Figure 13. Removing the Seat Figure 14. Removing the Battery Pack
Remove the Battery Pack
4. Lift the battery pack off the scooter. See figure 14.
Remove the Floor Basket
5. Lift the under-the-seat basket up and off of the frame. See #1 on figure 15. Lift the front
basket off of the tiller. See #2 on figure 15.

Figure 15. Removing the Baskets
24
1
2