Filter
Top Products
Restricted A071-0CG-2.02-2
Full
ix
About this Guide
This guide describes, in detail, how to configure the ANSI X3.28/SRIO Data Processing
Application (DPA).
Purpose of this Guide
This document describes the purpose and use of each of the configuration parameters of the
ANSI X3.28/SRIO DPA. This document makes no attempt to explain how the configuration
process operates, it is limited to describing the format and content of the DPA configuration
only.
To configure the data mapping the user must also allow for the SPABUS Data Collection
Application (DCA) to be configured in conjunction with this application. Refer to the SPABUS
Configuration Guide listed in the Additional Documentation for more information on
configuring the SPABUS DCA.
Who Should Use this Guide
This document is intended for use by individuals responsible for the configuration of the ANSI
X3.28/SRIO DPA in GE Energy Services RTUs. These people should be familiar with the
operation and maintenance of RTUs in general, but may not be familiar with the GE Energy
Services family of products.
Before reading this document, you should have a basic understanding of the WESDAC hardware
environment, the configuration system, the ANSI X3.28/SRIO DPA, and the SPABUS DCA.