Filter
Top Products
Restricted A071-0CG-2.02-2
Full
1
Chapter 1: Configuring Tables
The ANSI X3.28/SRIO DPA configuration contains all of the data structures necessary to
configure a RTU to communicate with an ANSI X3.28 master station.
1.1 ANSI X3.28/SRIO DPA Configuration Tables
The purpose of each configuration table is in Table 1.
TABLE NAME DESCRIPTION
A071MAIN This table configures each communication port in the system and the database table addressing
associated with it. The database table mapping allows the user to configure the default locations
for the data partitions.
A071DIMP This table defines the digital input items, which are to be reported back to the host station.
A071DOMP This table defines the digital output items, which are to be reported back to the host station.
A071EVMP This table defines the event items, which are to be reported back to the host station.
A071AIMP This table defines the analog input items, which are to be reported back to the host station.
A071AOMP This table defines the analog output items, which are to be reported back to the host station.
Table 1 ANSI X3.28/SRIO DPA Configuration Tables
☞
☞☞
☞ NOTE: The map tables are directly based on the SPABUS DCA. Points are
mapped into the ANSI X3.28 DPA based on the ITEM table created in the
SPABUS configuration. The user must cross-reference the SPABUS
ITEM table to ensure compatible data is mapped.