Restricted A071-0CG-2.02-2
Full
7
Chapter 3: Configuring the Mapping
Tables
The ANSI X3.28/SRIO DPA mapping tables specify the data to be placed in the corresponding
data partition. This data will be returned to the master station in response to a read command for
those partitions. Not all data partitions require a data-mapping table.
The ANSI X3.28/SRIO DPA contains the following mapping tables:
• Digital Input Map Table, A071DIMP
• Digital Output Map Table, A071DOMP
• Event Data Map Table, A071EVMP
• Analog Input Map Table, A071AIMP
• Analog Output Map Table, A071AOMP
Each of the mapping tables contains the same configuration parameter, and are configured in the
same way.
☞
☞☞
☞ NOTE: The SPABUS DCA Item Table, A070ITEM, must be configured before
the ANSI X3.28/SRIO DPA mapping tables can be configured.