Filter
Top Products
Quick Start Guide
19
February 2015
N1 ATEX Type n and Dust
Certificate: BAS00ATEX3105X; Baseefa11ATEX0275X
Standards: EN60079-0:2012, EN60079-15:2010, EN60079-31:2009
Markings: II 3 G Ex nA IIC T5 Gc (–40 °C ≤ T
a
≤ +70 °C);
II 1 D Ex ta IIIC T95 °C T
500
105 °C Da (-20 °C ≤ T
a
≤ +85 °C)
Special Conditions for Safe Use (X):
1. This apparatus is not capable of withstanding the 500 V insulation test that is
required by EN60079-15. This must be taken into account when installing the
apparatus.
2. Some variants of the equipment have reduced markings on the nameplate. Refer to
the Certificate for full equipment marking.
International
E7 IECEx Flameproof and Dust
Certificate: IECEx KEM 09.0034X; IECEx BAS 10.0034X
Standards: IEC60079-0:2011, IEC60079-1:2007-04, IEC60079-26:2006,
IEC60079-31:2008
Markings: Ex d IIC T6/T5 Ga/Gb, T6(-50 °C ≤ T
a
≤ +65 °C), T5(-50 °C ≤ T
a
≤ +80 °C);
Ex ta IIIC T95 °C T
500
105 °C Da (-20 °C ≤ T
a
≤ +85 °C)
Special Conditions for Safe Use (X):
1. This device contains a thin wall diaphragm. Installation, maintenance and use shall
take into account the environmental conditions to which the diaphragm will be
subjected. The manufacturer's instructions for installation and maintenance shall
be followed in detail to assure safety during its expected lifetime.
2. For information on the dimensions of the flameproof joints the manufacturer shall
be contacted.
3. The capacitance of the wrap around label, being 1.6 nF, exceed the limit in Table 9 of
EN60079-0. The user shall determine suitability for the specific application.
4. Some variants of the equipment have reduced markings on the nameplate. Refer to
the Certificate for full equipment marking.
I7 IECEx Intrinsic Safety
Certificate: IECEx BAS 09.0076X
Standards: IEC60079-0:2011, IEC60079-11:2011
Markings: Ex ia IIC T5/T4 Ga, T5(-60 °C ≤ T
a
≤ +40 °C), T4(-60 °C ≤ T
a
≤ +70 °C)
Table 8. Process Temperature
Temperature class Process temperature
T6 -50 °C to +65 °C
T5 -50 °C to +80 °C
Table 9. Input Parameters
HART
Voltage U
i
30 V
Current I
i
200 mA
Power P
i
0.9 W
Capacitance C
i
0.012 μF
Inductance L
i
0 mH