Filter
Top Products
7
How to use the front panel
Make sure the unit is turned on.
From the System key group
Press Local to activate the front panel keypad if the unit is not already in local mode. (If
the Local Lockout command is in effect, cycle power to return the unit to local mode.)
From the Function key group
Press Voltage to select the voltage function. To select a different function, simply press
the appropriate key.
To select a function appearing above a key (such as Current), first press the blue shift
key, then press the key below the function.
SYSTEM
FUNCTI
ON
Meter
Input
Protect
Trigger
Output
Status
Harmonic
Trigger
Control
Current
Voltage
Freq
Phase
Shape
Pulse
List
Index
Index
Recall
Sav e
Error
Address
Local
Output
on/off
Phase
Select
FUNCTION
Meter
Input
Protect
Trigger
Output
Status
Harmonic
Trigger
Control
Current
Voltage
Freq
Phase
Shape
Pulse
List
Index
Index
Outpu t
on/off
Phase
Select
NOTE: Pressing Output on/off, Phase Select, or (Shift) + Trigger immediately
implements the function. Display annunciators indicate that an immediate action has
occurred. All other function keys have command menus underneath them that are
accessed via the p and q keys after the function key is pressed. Refer to “The front
panel menus- at a glance”.
Use these keys to move through the command menus of the selected function.
FUNCTION
Meter
Input
Protect
Trigger
Outpu t
Status
Harmonic
Trigger
Control
Current
Voltage
Freq
Phase
Shape
Pulse
List
Index
Index
Output
on/off
Phase
Select
Local
Voltage