Filter
Top Products
19
These keys let you scroll through choices in a parameter list that
apply to a specific command. Parameter lists are circular; you can
return to the starting position by continuously pressing either key. If
the command has a numeric range, these keys increment or
decrement the existing value.
−
The numeric keys 0 through 9 are used for
entering numeric values.
−
Press shift and this key to enter a minus.
Press this key alone to enter a decimal point.
Until you press the Enter key, the values or
parameters you enter with the other Entry
keys are displayed but not entered into the
ac source.
E
Press Shift and this key to enter an exponent.
Clear Entry
Press Shift and this key to abort a keypad
entry and clear the value. When editing a
list, pressing Clear Entry truncates or clears
the list at the presently displayed list point.
Press this key alone to backspace and delete
the last digit entered
Calibration
Press Shift and this key to access the
calibration menu. Refer to appendix B In the
user’s for more information.
Notes:
1 Valid for Model Agilent 6834B only
2 Valid for Models Agilent 6814B, 6834B, and 6843A only
3 Valid for Models Agilent 6811B, 6812B, and 6813B only
4 Phase selectable on Agilent 6834B
¯ °
90
.
Enter
0
7
ENTRY Keys