A&D HV-60KV-WP Scale User Manual


 
Page 34 HV-WP/HW-WP Series
12. Full/Dribble Batch Function
12.1.
12.1.12.1.
12.1. Preparation (Setting Parameters)
Preparation (Setting Parameters)Preparation (Setting Parameters)
Preparation (Setting Parameters)
Step 1 Turn off the display.
Press the ON/OFF switch while the ZERO switch is
pressed and held. The function table is displayed.
Step 2 Press the ENTER switch to display an item of the
comparator function ( f6 ).
Step 3 Select a parameter of the full/dribble batch function
( f6 9 ) with the switch.
Step 4 Press the ENTER switch to store the new parameter
and display an item of the full/dribble batch sub-
function ( f10 ) .
Step 5 Select a parameter of the full/dribble batch sub-
function ( f10 0 ~ f10 3 ) with the switch.
Step 6 Press the
ENTER switch to store the new parameter
Step 7 Press the
F switch and the ENTER switch to exit from
the function table. Then the scale displays the
weighing mode.