A&D HV-60KV-WP Scale User Manual


 
Page 16 HV-WP/HW-WP Series
7. Basic Operation
7.
7.7.
7. Basic Operation
Basic OperationBasic Operation
Basic Operation
7.1.
7.1.7.1.
7.1. Turing
TuringTuring
Turing the Scale on/off and Weighing
the Scale on/off and Weighing the Scale on/off and Weighing
the Scale on/off and Weighing
Step 1 Ground the scale using the earth terminal.
Step 2 Place nothing on the weighing pan.
Step 3 Confirm that local voltage and receptacle type adapt to your scale.
Step 4 The scale turns on/off using the ON/OFF switch alternately.
Step 5 Check the accuracy of weighing. If you calibrate the scale, perform it after turning
the scale on for 30 minutes (warming up).
Step 6 Press the ZERO switch to display zero. (with nothing on the weighing pan.)
Step 7 Place an item on the weighing pan gently.
Step 8 You can read the mass value after the stability mark is displayed.
Step 9 Remove the item from the weighing pan.
Step10 Turn the scale using the ON/OFF switch off.
Memo
With the power cord connected, the scale consumes only the power for standby
status after turning off the scale.