A&D HV-60KV-WP Scale User Manual


 
HV-WP/HW-WP Series Page 21
8. Counting Mode
8.
8.8.
8. Counting Mode
Counting ModeCounting Mode
Counting Mode
The counting mode is the function to convert the total mass value (total weight) of
articles to a count, when each of these articles assume the same mass value.
It is necessary to store a unit mass to count articles.
8.1.
8.1.8.1.
8.1. Storing a Unit Mass
Storing a Unit MassStoring a Unit Mass
Storing a Unit Mass
Step 1 Press the MODE switch to display the unit .
Step 2 Press the SET switch to enter the mode to store a
unit mass.
Step 3 Press the switch to select the number of
samples. The greater the quantity of samples, the
greater the accuracy of the count.
5 pieces, 10 pieces, 20 pieces, 50 pieces, 100 pieces
Step 4 Put a container item on the weighing pan.
Press the TARE switch.
Step 5 Put in samples of number selected at step 3.
Press the ENTER switch to store it after the satbility
mark is displayed. Then the count is displayed.
Caution
When the sample is too light and it is not possible
to calculate a unit mass, the scale displays
lo
lo lo
lo ut
utut
ut
and returns to step 3. It is necessary to have more
than 5 digits in the unit of kg to weigh a sample.
Pressing the ENTER switch after
lo
lo lo
lo ut
ut ut
ut .
..
. is
displayed, the next unit is displayed.
When the unit mass is too light to store, the scale
displays
lo
lo lo
lo ut .
ut .ut .
ut . .
. .
.
Step 4 Remove all things from the weighing pan.