113
“
PHONE ONLY CODE SET
” or “CALLS & SERVICES CODE
SET” message appears in the display confirming that your
lock code was changed.
Note:
Your Rogue™ does not allow you to view the lock code for security
reasons. If you change the lock code, record the new code.
Restrictions
1. From the Home screen, touch
MENU
➔
Settings & Tools ➔
7. Phone Settings
.
2. Touch 7. Security.
You’re prompted to enter the lock code.
The default lock code is the last four digits of your
telephone number.
3. Enter the
Lock Code
. Several security menus appear in the
display.
4. Touch 2. Restrictions.
5. Enter the
Calls and Services Code
. The default calls and
services code is the last four digits of your telephone
number.
The following options display:
• Location Setting
: Options are Lock Setting and Unlock Setting.
• Calls
: Options are Incoming Calls and Outgoing Calls.
•Messages
: Options are Incoming Messages and Outgoing
Messages.
• Dial-Up Modem
: Options are Allow All and Block All.
6. Touch to make your selection.
Phone Lock Setting
Phone Lock Setting
restricts the use of your Rogue™ with the
exception of emergency outgoing calls to 911. You have to unlock
the Rogue™ to place or receive a call.
1. From the Home screen, touch
MENU
➔
Settings & Tools ➔
7. Phone Settings
.
2. Touch 7. Security.
You’re prompted to enter the lock code.
The default lock code is the last four digits of your
telephone number.
3. Enter the
Lock Code
. The security menu appears in the
display.
4. Touch
3. Phone Lock Setting
. The following options display:
• Unlocked
: If locked, unlocks the device or phone, depending on
your selection.
•On Power Up
: The Lock Code is required whenever you power up
the phone.
u960.book Page 113 Tuesday, July 14, 2009 10:41 PM
