7
1.
If needed, lay the phone
face down . Then, press
downward on the battery
cover (1) and slide it until
you feel a stop, then lift
the cover away from the
phone (2).
2. Lift the bottom end of the
battery up (1) and away
(2) from the phone.
Turn Your Phone On
1. Press and hold
the Power-Lock
key on the top
right of the
phone.
Note:
As with any other radio-transmitting device, do not touch the phone
near the antenna (at the bottom of the device) while using your phone
as this can affect call quality and can cause the phone to operate at a
higher power level than is necessary.
2. The phone begins searching for a network signal.
3. Once the phone finds a signal, the time, date, and day
appear in the second line of the display.
4. You’re now ready to place and receive calls.
Note:
If you are outside of your carrier’s coverage or roaming area, the No
Service icon ( ) appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
Turn Your Phone Off
1. With your phone on and unlocked, press and hold the End
key ( ), on the top right of the phone, for two or
more seconds. The
Phone options
menu pops-up in the
display. (For more information, refer to “Lock Mode” on
page 17.)
2. Touch
Power off
. You are prompted to confirm that you
want to power off your phone.
3. Touch
Yes
. Your phone powers off.
Note:
If your phone is on and you press for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Performing a Manual Hard Reset
Should your phone become unresponsive during operation, you
can perform a Manual Hard Reset.
