94
Appendix
6
Troubleshooting
In rare cases, the camera may not operate correctly due to
static electricity. This can be remedied by taking the battery out
and putting it back in again. When the mirror remains in the up
position, take the battery out and put it back in again. Then, the
mirror will retract when the camera is turned on again. If, after
performing these procedures, the camera operates correctly, it
does not require any repairs.
We recommend checking the following items before contacting
a service center.
Problem Cause Remedy
The camera does
not turn on
The battery is not
installed
Check if the battery is installed.
The battery power is
low
Replace with a charged battery
or use the AC adapter kit K-
AC50 (optional).
The shutter will
not release
There is no
available space on
the SD Memory
Card
Insert an SD Memory Card with
available space or delete
unwanted images. Also check
the file format settings for the
SD1 and SD2 slots.
Recording Wait until recording is finished.
The USB
connection with a
computer does not
work properly
The USB
connection mode is
set to [PTP]
Set [USB Connection] in the
[R2] menu to [MSC].
(z p.R25)
