76
Playback and Processing Functions
4
Digital Filters
You can process images with digital filters.
The following filters are available.
Caution
• Only JPEG and RAW images captured with this camera can be
edited using the digital filters.
1 Select an image for applying the digital filter and
then select D (Digital Filter) in the playback mode
palette.
2 Use the 23 keys to select a
filter and press the 4
button.
You can check the filter effect on the
screen.
You can also use the R dial to
select a different image.
3 Use the 23 keys to select
the parameter, use the 45
keys to adjust the value, and
press the 4 button.
4 Select [Use filters in combination] or [Save as].
The image is saved.
To apply additional filters to the same image, select [Use filters in
combination] and repeat Steps 2 to 4.
Memo
• You can apply up to 10 filters to the same image.
Filter name Effect Parameter
Monochrome
Creates a
monochrome image.
Filter Effect: OFF/Red/Green/Blue/
IR (Infrared Filter)
Toning (B-A): 7 levels
Extract Color
Extracts a specific
color and makes the
rest of the image
black and white.
Color: Red/Magenta/Blue/Cyan/
Green/Yellow
Color Freq. Range: –2 to +2
Color
Adds a color filter to
the image.
Color: Red/Magenta/Blue/Cyan/
Green/Yellow
Color Density: Light/Standard/Dark
Base
Parameter
Adj
Adjusts the
parameters to create
the desired image.
Brightness: ±8 levels
Saturation: ±3 levels
Hue: ±3 levels
Contrast: ±3 levels
Sharpness: ±3 levels
Soft
Creates an image
with a soft focus
throughout the
image.
Soft Focus: +1/+2/+3
Shadow Blur: OFF/ON
Applying the Digital Filter
Monochrome
OK
OK
MENU
100-0001
1
Exit
Red
OK
MENU
100-0001
1
Example: Color Filter
