![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/72/2720adaa-6015-46a6-8d9b-bf8a46e1bb11/2720adaa-6015-46a6-8d9b-bf8a46e1bb11-bg30.png)
2-32 Firmware User Guide
The Pre Shared Key field becomes visible to allow you to enter a Pre Shared Key. The key can be between
8 and 63 characters, but for best security it should be at least 20 characters. Clients wishing to connect
must also be configured to use WPA with this same key.
• WEP: Alternatively, you can provide a level of data security by enabling WEP (Wired Equivalent Privacy) for
encryption of network data. You can enable 40-, 128-, or 256-bit WEP Encryption (depending on the
capability of your client wireless card) for IP traffic on your LAN.
Wireless LAN Configuration
Enable Wireless: Yes
Enable Segmentation: No
SSID: 5247 3521
Channel... +---------------------------+
Closed System... +---------------------------+
Enable Privacy... | Off |
| WEP - Manual |
| WEP - Automatic |
| WPA - PSK (Pre-Shared Key)|
+---------------------------+
Wireless MAC Authentication...
Wireless LAN Configuration
Enable Wireless: Yes
Enable Segmentation: No
SSID: 5247 3521
Channel... 6
Closed System... Open
Enable Privacy... WPA - PSK (Pre-Shared Key)
Pre Shared Key:
Wireless MAC Authentication...
Select an 8 to 63 character passphrase. At least 20 is ideal for best security.