5-8 Firmware User Guide
Selecting Delete IKE Phase 1 Profile and choosing an IKE phase 1 profile name from the pop-up list displays a
confirmation alert asking you to confirm that you really want to delete the specified IKE phase 1 profile:
Key Management
You specify your IKE key management on a per-Connection Profile basis. You can do this in one of three ways:
• You can create your IKE Phase 1 Profile first, and then associate it with an existing Connection Profile
• You can create a Connection Profile and then modify it to associate it with an existing IKE Phase 1 Profile
• You can create a new Connection Profile and add a new IKE Phase 1 Profile as you go
You can do this WAN Configuration menus.
Refer to “Creating a New Connection Profile” on page 2-9 for instructions on creating a Connection Profile if you
don’t already know how to do that.
You can access the Key Management menus from the Change Connection Profile menu under the WAN
Configuration screen for a Connection Profile you have already created,
or you can create a new Connection Profile with your IKE settings included, as you go.
The IKE Key management settings are part of the Data Link Options that you specify in the Add Connection
Profile or Change Connection Profile menus. In this description, it is assumed that you are changing an existing
Connection Profile.
IPsec Configuration
+--IKE Phase1 Profile--+
Display+----------------------+
Add IKE| Netopia |
+------------------------------------------------------------+
| |
| Are you sure you want to delete this IKE Phase 1 Profile? |
| |
| CANCEL CONTINUE |
| |
+------------------------------------------------------------+
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+----------------------+
Display/Change
WAN Configuration
Main
Menu Connection Profile
