Internet Key Exchange (IKE) IPsec Key Management for VPNs 5-9
A Change Connection Profile screen is shown below.
Note: The Change Connection Profile screen will offer different options, depending on the model of gateway
you are using. You can associate an IPsec profile with the Primary, the Backup, or choose to apply it to Any Port
of the WAN interface by choosing the interface from the Interface Group pop-up menu as shown below.
From the Encapsulation Type pop-up menu, select IPsec. Then select Encapsulation Options and press Return.
The IPsec Tunnel Options screen appears.
Change Connection Profile
Profile Name: Easy Setup Profile
Profile Enabled: +-------------+
+-------------+
Encapsulation Type... | PPP |
Encapsulation Options... | ATMP |
| PPTP |
| IPsec |
IP Profile Parameters... +-------------+
Telco Options...
COMMIT CANCEL
Add Connection Profile
Profile Name: Profile 1
Profile Enabled: Yes
Encapsulation Type... IPsec
Encapsulation Options...
IP Profile Parameters...
+--------------+
+--------------+
Interface Group... | Primary |
| Backup |
| Any Port |
+--------------+
COMMIT CANCEL
