Monitoring Tools 8-3
Current status
The current status section is a table showing the current status of the DSL connection. For example:
Profile Name: Lists the name of the connection profile being used, if any.
Rate: Shows the line rate for this connection.
%Use: Indicates the average percent utilization of the maximum capacity of the channels in use for the
connection.
Remote Address: Shows the IP address of the connected remote gateway.
Est: Indicates whether the connection was locally (“Lcl”) or remotely (“Rmt”) established.
More Info: Indicates the NAT address in use for this connection.
Status lights
This section shows the current real-time status of the Router’s status lights (LEDs). It is useful for remotely
monitoring the gateway’s status. The Quick View screen’s arrangement of LEDs corresponds to the physical
arrangement of LEDs on the gateway. These LEDs and the corresponding display in the Telnet menu screen will
vary by model.
Each LED representation can report one of four states:
–: The LED is off.
R: The LED is red.
G: The LED is green.
Y: The LED is yellow.
Current WAN Connection Status
Profile Name----------Rate--%Use-Remote Address-----Est.-More Info------------
ISP 1536 10 IP 92.163.4.1 Lcl NAT 192.163.100.6
LED Status
-PWR---USB---DSL Link Activity--ETHERNET Activity Link--+--------LEDS---------
| '-'= Off 'G'= Green
G - - - G G | 'R'= Red 'Y'= Yellow
