2-12 Firmware User Guide
6. Toggle or enter your IP Parameters.
For more information, see:
• “IP Setup” on page 6-2
• “Network Address Translation (NAT)” on page 2-23
• “Stateful Inspection Options” on page 2-24
• “Filter Sets” on page 2-23
• The RIP Profile Options selection displays the RIP Profile Parameters screen.
IP Profile Parameters
Address Translation Enabled: Yes
IP Addressing... Numbered
NAT Map List... Easy-PAT List
NAT Server List... Easy-Servers
NAT Options...
Stateful Inspection Enabled: No
Local WAN IP Address: 0.0.0.0
Local WAN IP Mask: 0.0.0.0
Filter Set...
Remove Filter Set
RIP Profile Options...
Return/Enter to select <among/between> ...
Configure IP requirements for a remote network connection here.
RIP Profile Parameters
+-----------------------+
+-----------------------+
Receive RIP: | Off |
| v1 |
| v2 |
| Both v1 and v2 |
| v2 MD5 Authentication |
+-----------------------+
