3G WiFi Router User Guide YML-O-3G19W
24 www.netcomm.com.au
5.5 Wireless Bridge
The following screen appears when selecting Wireless Bridge, and goes into a detailed explanation of how to congure the wireless
bridge features of the wireless LAN interface.
A wireless bridge is utilised to extend your WiFi network coverage and enable distant computers to access network resources.
Click Save/Apply to implement new conguration settings.
FEATURE DESCRIPTION
AP Mode Selecting Wireless Bridge (or Wireless Distribution System) disables Access Point (AP)
functionality. Selecting AP enables Access Point mode, wireless bridge functionality will
still be available and wireless stations will be able to associate to the AP.
Bridge Restrict Selecting Enabled or Enabled (Scan) allows wireless bridge restriction. Only those bridges
selected in “Remote Bridges” will be granted access. Enabled (Scan) scans the detected
wireless networks and allows you to select one to connect to. Click Refresh to update the
station list when Enabled (Scan) is selected.
5.6 Station Info
The following screen appears when you select Station Info, and shows authenticated wireless stations and their status. Click the Refresh
button to update the list of stations in the WLAN.
FEATURE DESCRIPTION
MAC This shows the unique 48-bit MAC address of wireless clients
Associated Lists all the stations that are associated with the Access Point, along with the
amount of time since packets were transferred to and from each station. If a station
is idle for too long, it is removed from this list.
Authorized Lists those devices with authorized access.
