A SERVICE OF

logo

3G WiFi Router User Guide YML-O-3G19W
14 www.netcomm.com.au
3.3 Login Procedure
To login to the web interface, follow the steps below:
NOTE: The default settings can be found in 3.1 Default Settings
1. Open a web browser and enter the default IP address (http://192.168.1.1) for the Router in the Web address eld at the top of
the web browser window.
NOTE: For local administration (i.e. LAN access), the PC running the browser must be attached via Ethernet though not necessarily directly to the device. For remote
access, use the WAN IP address shown on the WUI Homepage screen and login with remote username and password.
2. A dialog box will appear, as illustrated below. Enter the default username and password, as dened in section 3.1 Default
Settings.
3. Click OK to continue.
NOTE: The login password can be changed later (see 6.4.2 Passwords)
4. After successfully logging in for the rst time, you will reach this screen.
3.4 Web User Interface Homepage
The web user interface (WUI) is divided into two window panels, the main menu (on the top) and the display screen (on the bottom). The
main menu has the following options: Basic, 3G Settings, Wireless, Management, Advanced, and Status.
Selecting one of these options will open a submenu with more options. Basic is discussed below while subsequent chapters introduce
the other main menu selections.
NOTE: The menu options available within the web user interface are based upon the device conguration and user privileges (i.e. local or remote)
BASIC / HOME
The Basic / Home screen is the WUI homepage and the rst selection on the main menu. It provides information regarding the rmware,
3G, and IP conguration of the device.
The following table provides further details:
FIELD DESCRIPTION
Model Name The model name of the Router.
Board ID The identication number of the main board.
Gateway Firmware version The rmware version on the device.
Bootloader (CFE) version The bootloader version of the device.
Wireless driver version The wireless driver version of the wireless module.
MAC Address The MAC address of the Router.
Network The name of or other reference to the mobile network operator.
Link Shows the connection status of the current 3G connection.
Mode The radio access technique currently used to enable internet access. It can be HSUPA, HSDPA, UMTS, EDGE, GPRS or Disconnected.
Signal strength The mobile network (UMTS or GSM) signal quality available at the device location. This signal quality affects the performance of the unit. If
two or more bars are green, the connection is usually acceptable.
SIM info Shows the SIM card status on the device.
LAN IP Address Shows the IP address for the LAN interface.
WAN IP Address Shows the IP address for the WAN interface.
Primary DNS Server Shows the IP address of the primary DNS server.
Secondary DNS Server Shows the IP address of the secondary DNS server.
Date/Time The time according to the device’s internal clock