YML-O-3G19W 3G WiFi Router User Guide
www.netcomm.com.au 23
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
5.4 MAC Filter
This screen appears when Media Access Control (MAC) Filter is selected. This option allows access to be restricted based upon the
unique 48-bit MAC address.
To add a MAC Address lter, click the Add button as shown below.
To delete a lter, select it from the table below and click the Remove button.
FEATURE DESCRIPTION
MAC Restrict Mode Disabled — Disables MAC ltering
Allow — Permits access for the specied MAC addresses.
NOTE: Add a wireless device’s MAC address before clicking the Allow radio button
or else you will need to connect to the Router’s web user interface using the supplied
yellow Ethernet cable and add the wireless device’s MAC address.
Deny — Rejects access for the specied MAC addresses.
MAC Address Lists the MAC addresses subject to the MAC Restrict Mode. The Add button
prompts an entry eld that requires you type in a MAC address in a two character,
6-byte convention: xx:xx:xx:xx:xx:xx where xx are hexadecimal numbers. A
maximum of 60 MAC addresses can be added.
Enter the MAC address on the screen below and click Save/Apply.
