EQQCL45W EQQCL4CW
| EQQCL45W Occurrence not found in the LTP: APPL(
appl
) IA(
iadt
)
| Explanation: OCL attempted to modify or list the application occurrence
appl
, which does not exist in the long term
| plan.
iadt
is the input arrival date and time used to search for the occurrence.
| System action: OCL processing continues.
| User response: Verify that the selection parameters are correct.
| EQQCL46W Only OCL instructions are accepted:
sysin_line
| Explanation: A non-OCL instructions was specified, and the initialization parameter TSOCMD is set to NO.
| System action: OCL processing continues.
| User response: If you want the user to be able to specify TSO commands or REXX instructions other than those of
| OCL, set the TSOCMD parameter to YES.
| EQQCL47W Oper. not found or not in Error:
opnum
APPL(
appl
) IA(
iadt
)
| Explanation: The application occurrences
appl
with input arrival date and time
iadt
does not contain the selected
| operation or the selected operation is not in error status.
| System action: OCL processing continues.
| User response: Verify that the selected operation really exists in the application occurrence.
| EQQCL48W Error code
errcode
does not match ERRCODE() for operation
opnum
| Explanation:
errcode
is the error code specified in the CHKAPPL instruction for operation
opnum
. OCL found the
| operation
opnum
in error status, but its error code does not match
errcode
.
| System action: OCL processing continues.
| User response: None.
| EQQCL49W Operation
opnum
is not in HOLD status
| Explanation: OCL tried to release an operation that was not manually held.
| System action: OCL processing continues.
| User response: None.
| EQQCL4AW Operation
opnum
is already in HOLD status
| Explanation: OCL tried to hold an operation that was already in HOLD status.
| System action: OCL processing continues.
| User response: None.
| EQQCL4BW Operation
opnum
is not in NOP status
| Explanation: OCL issued an UNNOP command against an operation that was not in NOP status.
| System action: OCL processing continues.
| User response: None.
| EQQCL4CW Operation
opnum
is already in NOP status
| Explanation: OCL issued a NOP command against an operation that was already in NOP status.
| System action: OCL processing continues.
| User response: None.
48 TME 10 OPC Messages and Codes
