EQQZ200I EQQZ202I
| EQQZ200I OPC/ESA
OPCTYPE
SUBSYSTEM NAME
HEARTBEAT
| Explanation: This message is sent by OPC at startup or as result of an OPC "heartbeat" command, to state that
| OPC is active and running.
|
OPCTYPE
One of the following values:
| CONTROLLER If the subsystem is an OPC controller.
| STANDBY If the subsystem is a stand-by controller.
| TRACKER If the subsystem is an OPC MVS tracker.
|
SUBSYSTEM NAME
The name of the OPC subsystem.
| System action: If the OPC instrumentation for GEM is active, this message is translated by NetView in a heartbeat
| event and is sent to GEM. When GEM receives this message, it adds an icon for this component in the Job
| Scheduling view in the GEM console.
| System programmer response: None.
| EQQZ201I OPC/ESA
OPCTYPE
SUBSYSTEM NAME
:
OPC STATUS
| Explanation: Displays the status of an OPC subsystem.
|
OPCTYPE
One of the following values:
| CONTROLLER If the subsystem is an OPC controller.
| STANDBY If the subsystem is a stand-by controller.
| TRACKER If the subsystem is an OPC MVS tracker.
|
SUBSYSTEM NAME
The name of the OPC subsystem.
|
OPC STATUS
One of the following values:
| FULLY_OPERATIONAL The subsystem is working correctly.
| PARTIALLY_OPERATIONAL The subsystem has limited functionality; for example, ER is
| not active. Therefore a controller can still schedule jobs, but
| cannot receive their status.
| NOT_OPERATIONAL Some core OPC functionality is not active; for example, a
| controller is not able to execute a plan or to submit a job.
| System action: If the OPC instrumentation for GEM is active, this message is translated into a Monitor Threshold
| event and sent to GEM, which updates the Job Scheduling view properly in the APM console.
| TME 10 OPC administrator response: If the OPC STATUS is not FULLY_OPERATIONAL, one or more of the
| OPC subtasks is inactive or is not working properly. Depending on the inactive tasks, the status can assume the
| values PARTIALLY_OPERATIONAL or NOT_OPERATIONAL. Message EQQZ202I lists the inactive OPC subtasks,
| which you should restart.
| EQQZ202I SUBTASKS:
LIST OF TASKS
INACTIVE
| Explanation: Lists the names of the OPC subtasks that are inactive. This message is always issued in conjunction
| with message EQQZ201I if the OPC status is not FULLY_OPERATIONAL.
| System action: Normal processing continues.
| TME 10 OPC administrator response: Restart the proper OPC subtask.
432 TME 10 OPC Messages and Codes
