A SERVICE OF

logo

3-10 Refilling Ink
3. Open the reservoir cover and pour the entire contents of the
refill bottle into the reservoir.
The LED blinks fast. This indicates that the refill was
detected, and a new profiler is needed.
4. Remove the profiler from the previous ink or cleaning solvent
supply, and discard it.
5. Insert the new profiler that came with the refill bottle into
the docking station.
The LED blinks slowly, then goes out. This indicates that the
new profiler was recognized and its data is being read. Keep
the profiler in the docking station until the next refill.