Configuring Selective Ringing 119
If the selected user extension is not a hunt group member or mapped to a
bridged extension, the Hunt Group and Bridged Calls column will have no
entries.
■ When a caller dials the hunt group number, the hunt group
member (in this case, 641005) hears the selected ring tone
indicating a hunt group call. By default, the hunt group ring tone is
configured in the profile assigned to the phone (see Creating a
Phone Profile). To change the default hunt group ring tone for the
phone selected in step 3, go to step 5.
■ When a caller dials the bridged extension (641004), the user at
641005 hears the selected ring tone indicating a bridged call. By
default, the bridged line ring tone is configured in the profile
assigned to the phone (see Creating a Phone Profile
). To change
the default bridged line ring tone for the phone selected in step 3,
go to step 6.
4 To configure selective ringing for an incoming call, follow these steps:
a On the Selective Ringing page, click Add Selective Ring.
The Add Selective Ring page appears. See Figure 39
.
Figure 39 Add Selective Ring Page
b In the Phone Address field, enter the phone number that will generate
a particular ring tone.
c In the Ring Tone drop down list, select the ring tone you want to
assign to the number entered in the Phone Address field.
d Click Save.
The Selective Ringing page appears listing the source number and its
associated ring tone.
You can modify the ring tone assigned to a number by selecting a
different ring tone in the Ring Tone drop down list.
