Filter
Top Products
Trace Oxygen Analyzer Maintenance
Teledyne Analytical Instruments 59
3. With one hand placed underneath the cell block ready to
catch the Micro-Fuel cell, lift up on the stainless steel gate in
front of the cell block. This releases the cell and cell holder
from the block. The cell and holder will fall out in your hand.
WARNING: Risk of electric shock high voltage exposed at
the end of enclosure!
Figure 5-1: Removing the Micro-Fuel
5.2.4 Installing a New Micro-Fuel Cell
It is important to minimize the amount of time that a Teledyne
Trace Oxygen Sensor is exposed to air during the installation process.
The quicker the sensor can be installed into the unit, the faster your TAI
O
2
sensor will recover to low O
2
measurement levels.